products
accessories replacement parts shipping index page
easy systems Fiber Drum Reference Guide Fiber Drum Reference Guide
 
 
ACCESSORIES
 
Straight 'N Easy® Wire Straighteners | Easy Balance | Conduit Clamps | Strain Relief  QCI Insulator
QCC® Lincoln ® #10 Connector  |  QCC® Lincoln ® #10 Bayonet
QCB Bulk Head Connector  |  Bulk Head Mounting Block | QCC Coupler  |  Coupler Mounting Block
Drum EasyLift Easy | Hook Easy 

 
Straight 'N Easy® Wire Straighteners
 

 

Straightens welding electrode for easy feeding and precise positioning. Can be used to load welding electrode for better power transfer if tip arcing occurs.

Modular design adapts to wire feeders, pay-out systems, or in-line with the conduit. Remote mounted in any location. Join two or more straighteners together for greater effect. Compact and lightweight.

Electrically Isolated Ball Bearing Straightening Rolls for all types of welding electrode. The A-1932 Standard Wire Straightener may be used for .023" (0.6mm) to 1/8” (3.2mm) diameter. A-2251 Heavy-Duty Wire Straightener may be used with 5/64" (2mm) to 3/16" (4.8mm); Mill Steel, Hard Facing, Exotics. Requires adaptors for quick disconnect set up.
Straight N Easy Wire Straightener
 
 
 Hex Key and Coupler Bushing
Straight ‘N Easy® comes with hex key and Coupler Bushing.
QCC® Lincoln®
#10 Connector
A-1791
QCC® Lincoln®
#10 Bayonet
A-1886
 
   
 
 

Heavy-Duty Straight ‘N Easy® supplied with hex key and Coupler Bushing with Ceramic Insert..

QCC® Lincoln®
#10 Connector with
Ceramic Insert
A-2263
QCC® Lincoln®
#10 Bayonet
with
Ceramic Insert
A-2265
 
 
 
 

To Top

DESCRIPTION
REF. NO.
MATES TO:
QCC® Lincoln® #10 Connector
A-1791

Straight ‘N Easy®, inlet or outlet; All (male) Bayonet Connectors

QCC® Lincoln® #10 Bayonet
A-1886

Straight ‘N Easy®, inlet or outlet; All (female) QCC® Connectors

QCC® Lincoln® #10 Connector with Ceramic Insert
A-2263
Heavy-Duty Straight ‘N Easy®, inlet or outlet; All (male) Bayonet Connectors
QCC® Lincoln® #10 Bayonet with
Ceramic Insert
A-2265
Heavy-Duty Straight ‘N Easy®, inlet or outlet; All (male) Bayonet Connectors
Lincoln is a registered trademark of Lincoln Electric.
To Top
 
Easy Balance

Zero Gravity Effect with constant balance through the cycle. Not a spring retractor.
Reduces conduit whipping, extending life.
Reduces stress on associated equipment.
Prevents kinking of the conduit.
Retracts to same position without over travel.
Long 4’ (1.2m) retraction range.
Handles most applications with a 2.5# (1.1kg) load capacity. Other sizes available on special order.
Easy Balance
To Top
 
Conduit Clamps
 

Secures conduits, limiting movement and abrasion.
Reduces flexing and fatigue at connections; distributes loads
Retains conduit position for faster wire changes.
Electrically isolates conduit from mounting.
Allows precise conduit mounting.
Long 4’ (1.2m) retraction range.
Handles most applications with a 2.5# (1.1kg) load capacity. Other sizes available on special order.
Conduit Clamps
Size Chart 1 Size Chart 2
 
DESCRIPTION
MATES TO:
L1
L2
L3
W
H1
H2
H3
QCC® Conduit Clamp - 1/2
  Ref. No.: A-1939-1/2  
2-3/4”
(70mm)
2-13/64”
(56mm)
1-21/32”
(42mm)
1-3/16”
(30mm)
1-11/16”
(43mm)
3/4”
(19mm)
7/64”
(3mm)
QCC® Conduit Clamp - 5/8
  Ref. No.: A-1939-5/8  
2-3/4”
(70mm)
2-13/64”
(56mm)
1-21/32”
(42mm)
1-3/16”
(30mm)
1-11/16”
(43mm)
3/4”
(19mm)
7/64”
(3mm)
QCC® Conduit Clamp - 3/4
  Ref. No.: A-1939-3/4  
ERC-HD® Conduit (A-2049)
3-5/64”
(78mm)
2-33/64”
(64mm)
1-31/32”
(50mm)
1-3/16”
(30mm)
1-13/16”
(46mm)
13/16”
(20.6mm)
7/64”
(3mm)
 
To Top
 
 
Strain Relief

Heavy wall rubberized tubing may be placed in position on any conduit, heat activated, adding reinforcement where needed. The 1-3/32” (27.7mm) I.D. reinforcement can recover to 1/2” (12.7mm) I.D.
 
   
 
DESCRIPTION
REF. NO.
MATES TO:
Strain Relief 12" (30cm)
A-1873-2
All conduits and fittings
Strain Relief 48” (121cm)
A-1873-1
All conduits and fittings (cut to desired length)
 
 
To Top
 
 
QCI Insulator

Non-conductive. Withstands spatter melting and high temperatures of the welding environment. Slides over connectors to insulate and isolate the fitting from short circuit.
 
 
 
To Top
 
QCB Bulk Head Connector

Quick connect with 1/2”-20 male threads, washers, and nut. Quick connect installation for remote electrode reels or custom installations where threads are not provided.

Ideally mounts into a 1/2” (12.7mm) diameter hole up to 3/8” (9.5mm) thick using the washers and nut supplied.
QCB Bulkhead Connector
QCB Bulk Head Connector
 
QCB Bulkhead Connector Exploded View
 
 
To Top
 
Bulk Head Mounting Block

Mounting block electrically isolates the QCB Bulk Head Connector and provides easy mounting to equipment. Can be face mounted through 3/16” (4.7mm) holes, or base mounted using the 1/4”-20 threads provided.
Bulk Head Mounting Block Bulk Head Mounting Block with Bulk Head Connector
 
 
To Top
 
QCC Coupler

Double sided female quick connector. Ideal for extending conduit systems or joining different styles of conduits. Coupler connects any two conduits with the Electron Beam male bayonet fitting or connector. Coupler is provided with an electrical insulating sleeve and retaining strap to prevent short circuits. It may be rigidly mounted to equipment using the Coupler Mounting Block.
QCC Coupler QCC Coupler, Sleeve, Strap
 
 
To Top
 
Coupler Mounting Block

Mounting block electrically isolates and remotely mounts the QCC® Coupler. The block may face mount through the 1/4” (6.3mm) holes, or base mounted using the 5/16”-18 threads provided.
Coupler Mounting Block Coupler Mounting Block with QCC Coupler
 
 
  Drum Easy

Features:

Four 3" x 1" Cast Iron Swivel Casters
4 foot long Nylon Strap with Rubber Coated Hook
Powder Coated Safety Yellow
Drum Easy weighs 31 Lbs.
Can be used with:

   •Pails with a 10-3/8" diameter
   •Drums up to 23" diameter

 
Specifications:
Model Number A-2323
Capacity is 500 Kg. or 1,000 pounds
Wheel Dimensions 3" diameter by 1" wide
 To Top
 
  Lift Easy
 

Features:

Allows for quick and gentle loading
Keeps Drum in the upright position
Lift Easy weighs 11 Lbs.
Powder Coated Safety Yellow
2-3/8" lifting eye for attaching to a
   Hook Easy or to a crane
 
Specifications:
Model Number A-2324
Capacity is 500 Kg. or 1,000 Lbs.
Drum 30 or 55 gallon

Net Weight 5 Kg or 11 Lbs.

 
 
  Hook Easy
 

Features:

Single Swivel Hook with Safety Latch
Hook Easy weighs 18 Lbs.
Screw Clamps on each side for attaching to forklift forks
48" Steel Safety Cable with hook to attach to forklift carriage
Powder Coated Safety Yellow
 
Specifications:
Model Number A-2325
Fits Forks up to 6" wide and 2" high
Capacity 4,000 Lbs.
 
   
 
To Top
Electron Beam Technologies, Inc.
1275 Harvard Drive • Kankakee, IL 60901 • USA Ph: 815-935-2211 • Fax: 815-935-8605
Contact Us For More Information • www.electronbeam.com
Electron Beam Technologies, Inc., Copyright 2015
Reproduction of our web site in part or entirety is strictly forbidden without written consent from Electron Beam Technologies, Inc.